NEW Redesigned chassis with Duratek Axle. Any 3500HD can become a 5000SD with an axle swap. See the upgrade
  1. Home
  2. The Trailer Toad

An axle that carries the tongue weight

The Trailer Toad is a patented auxiliary axle, or dolly, for tag-style trailers. It rides between your tow vehicle and your trailer and takes the trailer’s tongue weight off your hitch completely.

Close-up of a Trailer Toad hitched between the back of a truck camper and the front of a white enclosed trailer. The weight distribution hitch runs from the camper to the Toad, the Toad sits on one wheel under a fender, and the trailer's coupler sits on the ball at the rear of the Toad.
Weight distribution hitchConnects the Toad to your tow vehicle. Use the one you have, or Jok will match one to your rig.
Duratek torsion axleThe Toad’s own USA-made axle carries the trailer’s tongue weight. Its center vertical spindle tracks turns without scrubbing the tire.
Single rear ballYour trailer couples to the ball on the back of the Toad, the same way it would to a truck.
  1. 1Weight distribution hitch. Connects the Toad to your tow vehicle.
  2. 2Duratek torsion axle. The Toad’s own wheel carries the trailer’s tongue weight.
  3. 3Single rear ball. Your trailer couples to the back of the Toad.
How it works

What the Toad does for your towing

Your tow vehicle pulls. The Toad holds up the front of the trailer. Four things make that work.

A · Load

Carries the tongue weight

The trailer’s tongue sits on the Toad’s axle, so the tow vehicle carries zero tongue weight.

B · Reverse

Still backs up

You can reverse with the trailer attached. No unhitching to get into a campsite or driveway.

C · Hitch

One ball on the rear

A single ball on the back of the Toad. Your trailer couples to it the same way it couples to a truck.

D · Axle

Tracks turns, no scuff

A USA-made Duratek torsion axle with a center vertical spindle follows your turns without scrubbing the tire.

Requires a weight distribution hitch. Use the one you already have, or buy one from us and we’ll match it to your rig.

Models

Two Toads. One chassis.

Both models are now built on the same redesigned chassis, developed with Duratek Axle. The axle is the difference.

Standard duty

3500HD

The everyday Toad for tag-style trailers, matched to your trailer and tow vehicle on a phone call.

Axle
Duratek torsion, USA-made
Hitch
Single rear ball
Needs
Weight distribution hitch
Frame warranty
Limited lifetime
Ask about the 3500HD
Severe duty

5000SD

The heavier-duty axle for heavier trailers. Same chassis, same rear ball, more axle under it.

Axle
Duratek torsion, USA-made
Hitch
Single rear ball
Needs
Weight distribution hitch
Frame warranty
Limited lifetime
Ask about the 5000SD
3500HD → 5000SD

Bought a bigger trailer? With the new chassis you don’t buy a new Toad. Swap the axle and your 3500HD becomes a 5000SD.

Call about upgrading
Who it’s for

Fits what you drive

  • 01Pickups
  • 02Truck campers
  • 03Class C motorhomes
  • 04Class A gas
  • 05Diesel pushers
The bridge-end bump

Your rig stops taking the hit

Without a Toad, tongue weight and every road impact go straight into the back of your tow vehicle. That’s hard on frames, hitches and rear suspension, and you feel it at every bridge end. With the Toad carrying that load, the ride gets smoother for the vehicle and for you.

HITCH LOAD · WITHOUT TOAD HITCH LOAD · WITH TOAD BRIDGE END
Questions

Trailer Toad FAQ

Don’t see your question? Jok answers the phone himself.

How much tongue weight does my tow vehicle carry with a Trailer Toad?

None. The trailer’s tongue rests on the ball at the rear of the Toad, and the Toad’s own axle carries that weight. Your tow vehicle carries zero tongue weight.

Can I back up with a Trailer Toad attached?

Yes. You can reverse with the Toad and trailer hitched, so you don’t have to unhitch to get into a campsite or driveway.

What size trailer does the Trailer Toad work with?

The Toad is built for tag-style (bumper-pull) trailers from 5,000 to 22,000 lb. Call Jok with your trailer’s weight and he’ll tell you which model fits.

Do I need a weight distribution hitch?

Yes. The Toad connects to your tow vehicle through a weight distribution hitch. You can use the one you have, or buy one from Trailer Toad and Jok will match it to your rig.

What tow vehicles does it fit?

Pickups, truck campers, Class C motorhomes, Class A gas motorhomes and diesel pushers.

Can I upgrade a 3500HD to a 5000SD?

Yes. Both models are built on the same redesigned chassis, developed with Duratek Axle, so a 3500HD becomes a 5000SD with an axle swap.

Do you ship Trailer Toads?

No. Freight costs on heavy equipment are too unpredictable to quote fairly, so every order is priced by phone and picked up at the shop in Janesville, Iowa.

What warranty comes with the Trailer Toad?

The frame has a limited lifetime warranty. Ask Jok for the full terms.

Not sure what your rig needs?

Call or text Jok with your trailer weight and tow vehicle. You’ll get an honest answer, even if it’s the cheaper one.

Call or text (319) 404-7001